Easy, Affordable Financing Available Now!

   Apply Now

New Holland HM234 Economy

New Holland HM234 Economy

Double tap to zoom

New Holland HM234 Economy

 

Features

FAST AND AFFORDABLE CUTTING
The HM Series offers smooth, fast, and reliable disc cutting at an economical price.

EASY OPERATION
A simple design means easy operation. A single-acting hydraulic cylinder makes it easy to lift the cutterbar at the end of each pass. A transport lock makes it easy to move from field to field.

PROVEN CUTTERBAR
Depending on the model, four, five or six low-profile, oval cutting discs use two knives per disc to slice through crop. Knives, made of high-quality steel, are reversible for twice the cutting life.

PROTECTING YOUR INVESTMENT
Rock guards and skid shoes protect the discs and carry the cutterbar, while a spring-loaded breakaway latch protects it by allowing the mower to pivot back if an obstacle is encountered

 

RELIABLE DESIGN

CLEAN, HIGH SPEED CUTTING
Slice through thick crops, even gopher mounds, at high speed with the HM Series disc mowers. Depending on the model, four, five or six low-profile, oval cutting discs use two knives per disc to slice through the wet grasses. Knives, made of high-quality steel, are reversible for twice the cutting life.

ENCLOSED GEAR-DRIVEN CUTTERBAR
The enclosed gear-driven cutterbar provides years of reliable service. Discs are retained with six bolts for easier service.

PROTECTION AGAINST FIELD DAMAGE
Several important HM Series features fend off foreign objects and keep you moving through the field:
• Rock guards and skid shoes protect the discs and carry the cutterbar over uneven ground.
• A spring-loaded breakaway latch protects the cutterbar by allowing the mower to pivot back the instant it encounters an obstacle.
• An adjustable flotation spring allows you to change cutterbar ground pressure.

OVERRUNNING CLUTCH IS STANDARD
The 540-rpm PTO driveline with overrunning clutch protects the driveline and makes hook-up easy.

CONVENIENT TO USE

EASY OPERATION
The simple design of HM Series disc mowers make them easy to use. A single-acting hydraulic cylinder makes it easy to lift the cutterbar at the end of each pass. Right-side swath divider wheel separates each cut path.

SIMPLE TRANSPORT
A transport lock makes it easy to move from field to field.

EASY HOOKUP
The three-point-hitch mounting, two adjustable parking stands and a storage support for the PTO shaft make it easy to attach and remove HM Series mowers.

Specifications

HM234 Economy  
Cutter Bar  
Cutting width ft. in. (mm) 5' 6" (1676)
Cutting height in. (mm) 0.63-2.36 (16-60)
Cutter bar tilt angle degrees 0 to -8
Cutter bar operating range degrees +18 to -30
Breakaway angle degrees 21
Type cutterbar Enclosed gear drive
Number of discs 4
Knives per disc 2
Disc cutting diameter in. (mm) 20.47 (520)
Disc drive Spur gear drive in common sump
Disc speed RPM 3,154
Cutter bar gear protection No
Swath width, approx standard** in. (mm) 50 (1270) includes std. RH swath wheel
Swath width with optional swath wheel** in. (m) 38 (965) w/LH swath wheel
Driveline  
Minimum PTO horsepower required hp (kW) 35 (26.1)
Input speed RPM 540
PTO shaft spline/size required 6-spline/ 1 3/8"
Driveline protection Belt drive to cutter bar
Overrunning clutch Standard
Belt tension Adjustable drawbolt
Hydraulics and Hitch  
Hydraulic circuits required One remote
Minimum relief pressure required psi (bar) 2,320 (160)
Hitch Category I or II
Dimensions and Weight  
Overall width in. (mm) 134.25 (3410)
Overall length in. (mm) 54.33 (1380)
Height - transport position* in. (mm) 92.52 (2350)
Weight, shipping lb. (kg) 933 (423)
Weight, operating lb. (kg) 822 (373)
Maximum transport speed NA
Tires/wheels NA