- Home
- Inventory
- New Holland Parts
- New Products
- Parts Online Store
- Equipment Videos
- Departments
- Company Info
- Equipment Specials
- Contact Us
Double tap to zoom
Westfield designed every detail of the MKX 16 for today’s demanding large farm and commercial operators. From the engineered top truss, for added strength and stability, to a long list of standard features, the MKX 16 is built to last.
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Wear Edge Technology
Westfield developed Wear Edge Technology™ to extend the life of the flighting. This provides an extra layer of steel welded to the edge on critical wear points. As a result, flighting lasts longer and needs to be replaced less often – saving time and money.
Powder Coat Paint
Westfield uses a durable powder coat paint for a strong, long lasting finish that looks good and protects against rust.
Electric Power Swing & Hopper Lift Arm
The MKX 16 comes standard with an electric remote swing hopper that can be switched from the left or right hand side of the auger, making unloading fast an easy.
Speed Reducer-Reverser
The speed reducer reduces the RPM of tractors to a speed suitable for augers. The reverser allows the flight direction to be reversed for quick and easy clean-out.
Square, One-Bolt Flight Connections
The square, one-bolt flight connections ensure the flighting maintains proper alignment for smooth operation.
Removable Slip-On Boot Flight
Boot fighting uses Wear Edge Technology™ to extend the life of flighting. Flighting can be easily replaced without having to remove and replace the entire lower flight.
Service and Maintenance
The MKX Series features six easily accessible service points to allow for quick maintenance of u-joints, chains, bearings, and gearboxes.
The large clean-out, service points, and access panels allow for fast and efficient auger cleaning and servicing. Tool free inspection areas include, the hopper chain cover, neck transition, boot clean-out and swing head.
Model | MKX16 -105 |
TUBE GAUGE | 10 GA |
TUBE CONNECTORS | ¼" (0.6cm) Angle Flange |
MAIN FLIGHTING | 15" (38.1cm) x ¼" (0.6cm) Stretched & Welded |
WEAR EDGE TECHNOLOGY™ (REINFORCED FLIGHT) |
¼" (0.6cm) Main Flighting with Wear Edge Technology™ on Critical Grain Transfer Points (Boot Flight: ¼" (0.6cm) plus 10 GA Wear Edge Technology™ = 5 /16" (0.8cm) |
FLIGHTING SHAFT | 3.5" (8.9cm) x 11 GA Tubing; Square Flight Connector |
UPPER BEARING | 2" (5.1cm) Pillow Block Greaseable Ball Bearings |
SPEED REDUCER GEARBOX | Enclosed, Cast Casing, 1000 RPM Reducing Gearbox (540 RPM) with Reversing Capability |
TUBE TRUSSING | 3.5" (8.9cm) x 11 GA Tubing; ½" (1.3cm) Cable Stays |
HYDRAULIC LIFT | 2 x 6.5" (16.5cm) Bore Cylinders; ½" (1.3cm) Aircraft Cable |
UNDERCARRIAGE | 4" (10.2cm) x 8" (20.3cm) HSS Tubing |
AXLE | 4" (10.2cm) x 4" (10.2cm) x 3 /16" (0.5cm) Tubing; 4" (10.2cm) x 4" (10.2cm) x ¼" (0.6cm) on Extensions |
HUB | 8-Bolt Agricultural Type |
TIRES | 22.5" (57.2cm) Agricultural Tires |
PTO SHAFT | 55E Double CV with 2-Bolt Shear |
PARKING JACK | 12,000 lbs. (5445.1kg) |
LOW PROFILE HOPPER DIMENSIONS | 68" Length (172.7cm) x 48" Width (121.9cm) x 11" Height (27.9cm) |
PSI REQUIRED TO RAISE AUGER | 1700 PSI (117.2 bar) |
HP REQUIRED (WITH DRY WHEAT) | 200 HP (149.1 kW) |
WHEEL TREAD | 148" - 182" (4511 - 5547.4cm) |
TRANSPORT HEIGHT (18" HITCH) | 13' 8" (4.2m) |
DISCLAIMER: This auger was proudly designed to handle dry, free-flowing grains up to a maximum of 65 lb/bu (52 lb/cf). Any usage of this auger outside of this is not authorized by AGI. |
Offer Ends Dec 31, 2024
Offer Ends Dec 31, 2024
Offer Ends Dec 31, 2024