Salford Group 30' TOOLBAR SINGLE MOUNTED TANK

Double tap to zoom

 

Features

  • APPROX. MINIMUM HORSEPOWER REQUIRED IS 200 TO 240 HP - DEPENDING ON CONFIGURATION
  • REQUIRES MINIMUM OF 3 HYDRAULIC CIRCUITS
  • FAN REQUIRES 21 GPM @ 2800 PSI ON CLOSED CENTER HYDRAULICS
  • BUSHEL CAPACITY OF TANK IS CALCULATED BY VOLUME; ACTUAL CAPACITY MAY VARY BY COMMODITY TYPE

Specifications

30' TOOLBAR STANDARD FEATURES -  SINGLE MOUNTED TANK

  • REAR TOOLBAR:
    • 500 SERIES DOUBLE DISC OPENERS ON 7 1/2" SPACING
    • 48 OPENERS TOTAL
  • AXLES:
    • MAINFRAME - 19.0/45-17 TIRES / 8-BOLT HUBS / WALKING TANDEMS & CASTERS
    • WINGS - 31.5 x 13.5L x 15 TIRES ON 6-BOLT HUBS / WALKING TANDEMS & CASTERS
    • AIR SYSTEM FOR REAR TOOLBAR:
  • AIR SYSTEM FOR REAR TOOLBAR:
    • 6-TOWERS WITH 8-OUTLETS
    • 2 1/2" PRIMARY LINES TO TOWERS / 1" SECONDARY LINES TO ROW UNITS
    • POLYURETHANE PRIMARY LINES
  • UNITS SHIPPED AS FULL KNOCK DOWN OR PARTIAL ASSY AS TRUCKING WIDTH PERMITS
    • APPROX. WEIGHT WITH MOUNTED TANK - 21,300 LBS
    • TRANSPORT WIDTH - 14'11"
    • TRANSPORT HEIGHT - 13'10"

AVAILABLE 30' FRONT TOOLBAR OPTIONS -  SINGLE MOUNTED TANK

  • OPTION 1 - NO FRONT TOOLBAR ATTACHMENTS
  • OPTION 2 - 7 1/2 " - SPACING NO-TILL COULTERS (48 COULTERS)

AVAILABLE MOUNTED TANK CONFIGURATIONS -  SINGLE MOUNTED TANK

  • OPTION 1- SINGLE MOUNTED TANK / 6-OUTLET / GROUND DRIVE METER / 180 OR 140 BU
    • FAN: 17" S3 FAN W/ 16 CC MOTOR (SEE HYDRAULIC REQUIREMENTS
    • METER DRIVES: ZEROMAX INFINITELY ADJUSTABLE GROUND DRIVE

    • METER ROLLERS: 1/2" PLASTIC PEGGED ROLLERS

    • METERBOXES: 6-OUTLET STAINLESS STEEL FOR 2 1/2" LINES

    • TANKS: POLYMER TANK WITH STAINLESS STEEL INNER COMPONENTS

    • HOSE: 2 1/2" STAINLESS STEEL RIGID AND POLYURETHANE FLEX HOSE

    • AXLE: 28L x 26 DIAMOND TREAD TIRES ON 10-BOLT HUBS

    • ELECTRONICS:  DICKEY-JOHN INTELLI-AG IOSbus* CONTROL SYSTEM

    • Includes: Fan Speed Sensor, Meter Shaft Encoder, Bin Level Sensor, Bin Pressure Sensor, On-board ECU, Single Blocakge Sensor per Tower, Required ISObus* Harness to Tractor (Virtual terminal not included)
  • OPTION 2 -  SINGLE MOUNTED TANK / 6-OUTLET / HYD VARIABLE RATE / 180 OR 140 BU
    • FAN: 17" S3 FAN W/ 16 CC MOTOR (SEE HYDRAULIC REQUIREMENTS
    • METER DRIVES: DICKEY-JOHN HYDRA-DRIVE HYD VARIABLE RATE

    • METER ROLLERS: 1/2" PLASTIC PEGGED ROLLERS

    • METERBOXES: 6-OUTLET STAINLESS STEEL FOR 2 1/2" LINES

    • TANKS: POLYMER TANK WITH STAINLESS STEEL INNER COMPONENTS

    • HOSE: 2 1/2" STAINLESS STEEL RIGID AND POLYURETHANE FLEX HOSE

    • AXLE: 28L x 26 DIAMOND TREAD TIRES ON 10-BOLT HUBS

    • ELECTRONICS:  DICKEY-JOHN INTELLI-AG IOSbus* CONTROL SYSTEM

    • Includes: Fan Speed Sensor, Meter Shaft Encoder, Bin Level Sensor, Bin Pressure Sensor, On-board ECU, Single Blocakge Sensor per Tower, Required ISObus* Harness to Tractor (Virtual terminal not included)

OTHER OPTIONS -  SINGLE MOUNTED TANK

  • DIGI-STAR SCALE KIT WITH CAB READOUT
  • DIGI-STAR SCALE-LINK ISObus SCALE KIT (SEE ABOVE NOTE ON ISObus)
  • TOW-BEHIND CART HITCH (INCLUDES ONE PAIR OF HYD LINES)
  • PIONEER COUPLER KIT (1/2" REAR REMOTE LINES)
  • DEDUCT ELECTRONIC CONTROLS