Equipment Search
Windrower Headers Haybine® 14HS
CUTTING WIDTH FT. IN. (M)
14' 3" (4.34)
NUMBER OF DISCS
Features
REDESIGNED FOR FASTER SPEED
Durabine™ PLUS Series disc headers take advantage of faster speeds on Speedrower® PLUS windrowers without compromising cutting and conditioning quality.
CLEAN & CLOSE CUTTING
The MowMax™ II PLUS true modular cutterbar found on Durabine PLUS heads provides an even cleaner cut with faster tip speed and a lower-profile compared to previous models.
LEGENDARY PERFORMANCE
HS Series Haybine sickle headers continue the legacy of impeccable cutting performance, fast drying, and time-tested reliability.
UNIFORM, FAST-DRYING SWATHS
Choose the best conditioning system for your crops – rubber chevron rolls, steel chevron rolls, or high-contact chevron rolls.
HAYBINE® SICKLE HEADERS
HIGH-CAPACITY CUTTING PERFORMANCE
Dual counter-stroking sickles feature a timed modular wobble drive that assures smooth cutting with minimal vibration and maintenance. Over-serrated knives slice quickly at over 1,800 rpm and the three-inch stroke delivers unrivaled high-capacity cutting for best-in-class performance. Bolt-on knife sections provide long cutting life and easy replacement, and adjustable knife hold-down clips help speed up maintenance.
CONSISTENT CROP FEEDING
The fully-adjustable five-bat reel sweeps crop smoothly to the exclusive floating auger. This 20-inch auger with five-inch flighting floats up to two inches to handle heavy crops and delivers crop evenly to the conditioning rolls.
PROVEN CONDITIONING
New Holland chevron-design intermeshing rubber rolls are known for their thorough conditioning and fast crop dry down. The proven torsion-bar roll-pressure system applies near-constant pressure through the wide, 102-inch rolls. The system allows the rolls to open automatically when needed to clear slugs of material without stopping. No tools are needed to adjust conditioning roll pressure. High-contact chevron rolls and steel chevron intermeshing rolls are also available.
• A – Hand crank to adjust roll pressure
• B – Roll pressure indicator
Specifications
| Dimensions & Weights | |
| MODEL | Haybine® 14HS |
| Cutting width ft. in. (m) | 14' 3" (4.34) |
| Overall width ft. in. (m) | 16' 3" (4.95) |
| Weighting with conditioning system lbs. (kg) | 3900 (1770) |
| Weight less conditioning system lbs. (kg) | – |
| Durabine PLUS MowMax™ II PLUS Cutterbar | |
| Cutting width ft. in. (m) | – |
| Cutting height range in. (mm) | – |
| Cutting angle | – |
| Number of discs | – |
| Maximum disc speed rpm | – |
| Number of reversible | swing-away knives |
| Knife tip speed mph (kph) | – |
| Flotation | – |
| ShockPRO™ Disc Drive Protection System | – |
| 3-Year MowMax Factory Cutterbar Warranty | – |
| Haybine Cutterbar | |
| Cutting width ft. in. (m) | 14' 3" (4.34) |
| Cutting height range in. (mm) | 1.2-6.2 (30.5-157.5) |
| Cutting angle | -6 to -12 degrees |
| Type | Timed |
| Knives | Over serrated |
| Guards | 2-tine |
| Skid shoes | 4 |
| Drive type | Open |
| Speed spm | 1810 |
| Stroke in. (mm) | 3 (76) |
| Haybine Reel | |
| Type | 5 bat |
| Adjustments | Fore/aft and vertical |
| Mechanical drive rpm | 58 - 83 |
| Hydraulic drive (optional) rpm | 0 - 76 |
| Speed adjustment (mechanical) | Variable sheave |
| Diameter in. (mm) | 42 (1067) |
| Drive type | Belt and chain |
| Tine bars | Segmented |
| Bushings / bearings* in. (mm) | 1.25 (31.75) |
| Auger | |
| Auger diameter in. (mm) | 20 (508) |
| Auger type | Floating |
| Conditioning Systems | |
| Roll types | Chevron-pattern rubber or steel |
| Roll length in. (mm) | 102 (2591) |
| Roll diameter in. (mm) | 10 .16 (258) |
| Roll speed rpm | 717 |
| Roll pressure | Hand crank |
| Roll gap | Adjustable stop-bolt |
| Roll drive | Spur gearbox and PTOs |
| Windrow/swath width in. (mm) | 38 to 96 (965 to 2438) |
© 2019 - 2023 Intermountain New Holland