Double tap to zoom
TROUBLE-FREE CUTTING AND PEACE OF MIND
New Holland H6000 Series heavy-duty disc mowers breeze through the toughest conditions to give you a clean, even cut in less time. Discs spin up to 3,000 rpm, producing a knife tip speed of up to 187 mph to slice through dense, wet grasses, fire ant hills and gopher mounds. Select from four heavy-duty models, including a pull-type model with a cut width of over 10 feet. - Less
TROUBLE-FREE CUTTING AND PEACE OF MIND
New Holland H6000 Series heavy-duty disc mowers breeze through the toughest conditions to give you a clean, even cut in less time. Discs spin up to 3,000 rpm, producing a knife tip speed of up to 187 mph to slice through dense, wet grasses, fire ant hills and gopher mounds. Sele... + Read More
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
A NEW LEVEL OF DISC MOWER PRODUCTIVITY.
The eight-disc heavy-duty H6830 pull-type disc mower combines the benefits of a wide 10-foot, four-inch cut with easy hookup and a low horsepower requirement.
IN-FIELD FLOTATION
The H6830 header is suspended from the main frame of the machine. Large flotation springs allow the header to float both vertically and laterally for even cutting in uneven terrain, preventing damage and bulldozing. You can adjust the flotation spring tension easily by turning the anchor bolts.
TIGHT TURNING, NARROW 10’10” TRANSPORT
The primary PTO uses an 80-degree constant velocity joint that permits tight turning. A secondary CV driveline option allows you to mow in the transport position to “steer” around field obstacles on the fly. Hydraulic tongue swing allows you to power the machine from transport to operating position and back. End shields flip up for a narrow 10-foot, 10-inch transport width.
WIDE 95-INCH SWATH
Wheels are located inboard of the cutting edge to eliminate run-down of uncut crop. Crop deflectors direct the cut crop inside the tire path and into a wide 95-inch swath.
H6830 Side Pull | |
Cutter Bar | |
Cutting width ft. in. (mm) | 10' 4" (3150) |
Cutting height in. (mm) | 0.95-3.25 (24-82.5) |
Cutter bar tilt angle degrees | 0 to -10 |
Cutter bar operating range degrees | +18 to -28 |
Breakaway angle degrees | NA |
Cutter bar floatation | Vertical adjustable spring |
Type cutterbar | MowMax™ cutterbar, modular, w/individual sealed reservoirs |
Number of discs | 8 |
Knives per disc | 2 |
Disc cutting diameter in. (mm) | 19.7 (500) |
Disc drive | Bevel gears in sealed modules |
Disc speed RPM | 2,835 |
Cutter bar gear protection | Std. ShockPRO: easy replace ShockPRO hub with a partial complement of sacrificial splines |
Swath width, approx standard** in. (mm) | 95 (2413) |
Swath width with optional swathboards** in. (m) | N/A |
Driveline | |
Minimum PTO horsepower required hp (kW) | 60 (44.7) |
Input speed RPM | 540 |
PTO shaft spline/size required | 6-spline/ 1-3/8" |
Driveline protection | Slip clutch |
Overrunning clutch | Standard |
Belt tension | N/A |
Hydraulics and Hitch | |
Hydraulic circuits required | Two remotes |
Minimum relief pressure required psi (bar) | 1,500 (104) |
Hitch | Category II drawbar |
Dimensions and Weight | |
Overall width in. (mm) | 196 (4978) |
Overall length in. (mm) | 183 (4648) |
Height - transport position* in. (mm) | 62 (1575) |
Weight, shipping lb. (kg) | 3,035 (1379) |
Weight, operating lb. (kg) | 2,610 (1186) |
Maximum transport speed | 20 mph/ 32.2 kph |
Tires/wheels | 27 x 9.5 x 15 6 PR |
Good through May 31, 2021
Good through Jun 1, 2021
Good through Sep 30, 2021