The innovative Degelman Hydralink allows for even, adjustable pressure from the comfort of the cab, all while allowing each section to contour to the land independently.
Under float or under pressure, the harrow sections are designed for flexibility. The spring bars are positioned along the sides of the harrow frame providing an even distribution of pressure to the frame. The spring bars can then flex in response to counter pressure from the land contours with each section rising over hills and falling into hollows.
The Strawmaster Pro is equipped with an adjusting rod and arm located on a rubber dampening system. This will allow for harrow frame sections adjustment to ensure that they are running parallel to the ground.
Simply rotate the 8” x 8” beam hydraulically and apply more pressure through the spring bars. Strawmaster works the way you want it to.
The Degelman Strawmaster Pro is a revolutionary machine designed for both straw management and light tillage applications. With 30 inch long tines placed in 4 rows, this machine is beyond any other harrow bar. The Strawmaster Pro will shatter straw, control weeds, rake flax straw, and incorporate seed and chemicals or act as light tillage.
Strawmaster Pro is specifically designed for today’s continuous cropping practices. It is the product of the latest technological innovations, solid engineering and superb craftsmanship. And you won’t find a better harrow bar for applying herbicide: travel at higher speeds than conventional harrow bars without skipping, hold larger loads of straw, and adjust your machine to tailor your needs.
Incorporating is obviously a natural for Strawmaster Pro. These heavy extra-long tines are much stiffer than conventional tines and offer better penetration of built up straw mulch. Just set the machine to the aggressive setting you need. And with Strawmaster’s spring control bars you can increase the pressure for even, more continuous penetration.
You may have noticed, Degelman has made its mark in the industry by over doing things. Making our machines big and heavy, developing practical solutions and holding tight manufacturing tolerances, simply makes Degelman machines perform better, last longer with less problems.
Zero Maintenance is our goal, which means we ask you to do two things, “Drop the Pin and Go”.
Steerable end wheels allow the operator to move from transport to field position with ease.
The Alliance 328 HS (High Speed Flotation I-328) is designed with good self-cleaning characteristics, which is suitable for on and off-the-road agricultural service on trailers and implements. The high load capacity and low inflation pressure of the tire results in high degree of agricultural soil protection, as well as low rolling resistance on both, on and off-road uses. It’s strong nylon construction and compounds ensure long life.
|Carrying Frame||12" x 16" beam 3/8" wall|
|Harrow Frame||8" x 8" beam 1/4" wall|
|Tine Specifications||4 Bar - 30" Tine - Carbide Endura-Tip|
|Tine Angle||5° to 65° Mechanically|
|Hydralink||4" x 24" Pin Eye|
|Hyd. Cylinders (Hydraulic Jack)||3 - 3/4" x 8" Pin Eye|
|Hyd. Cylinders (Steerable End Wheels)||2 - 1/2" x 16" Pin Eye|
|Hyd. Cylinders (Auto-fold Latch)||2" x 4" Pin Eye|
|Tires (x8)||550/45 - 22.5 High Speed|
|Minimum Horsepower||450 h.p.|
|Approximate Weight||37,000 lbs|