Bad Boy Mowers 852CC Kawasaki® FX 27HP

Double tap to zoom

 

Features

Strength

All New 1.5˝ x 3˝ Heavy-Gauge All-Steel Rail backbone.

All New Patented independent cast front iBeam suspension rails.

Patented Dual Deck Support Isolators, paired with our new deck wear pad, minimizes damage from side impacts.

Comfort

All New 3-Link Rear Trailing Arm Suspension — the first and only of its kind in the industry. Matched with front suspension arms, to provide a smoother ride, more consistent tire contact and increased hillside stability.

All New high-back seat for all day comfort and support.

Cut Quality

All New Sloped 1/4˝ Deck with 3/8˝ sides. The front deck chamber allows the grass to stand at a more natural, upright position before contact with the cutting blades.

All New Deck Idler Arm and Deck Spring with bearings for consistent belt tension and more consistent cutting speed.

PEER Spindles, made of ductile iron, are 60% stronger than aluminum housings. Optimized for a maintenance-free spindle.

Power
Dual 16cc Hydro-Gear Pumps with 18ci Parker Wheel Motors,preferred by professionals.

Specifications

MOWER SPECIFICATIONS
 
Cutting Width 5400 - 54"; 6100 - 61"
Cutting Height 2" – 6" In 1/3" Increments
Blades 5400 - 1/4" x 2 1/2" x 18 3/4", High Lift, Heat Treated
6100 - 1/4" x 2 1/2" x 21", High Lift, Heat Treated
Lift and Height Adjustment Foot-Assist Manual Lift With Dial-Style Height Adjustment. Optional Electric Lift
Blade Belt Single V-Belt Spring Tension
Anti-Scalp Rollers 6 Total (4 Double-Bracketed Front Wheels, 2 Rear Wheels)
Deck Flotation Floats On Four 1/4" Deck Hangers
Deck Thickness 1/4" Thick Solid Steel With Additional 1/4" Steel Leading Edge And 3/8" Side Trim
ENGINE SPECIFICATIONS
 
Gross Horsepower/CC 852cc (27hp) Air-Cooled Kawasaki® FX
Cylinders 90 Degree V-Twin
Displacement 852 cc
Maximum Torque 44.6 ft. lbs. @ 2,400 RPM
Fuel Requirement Unleaded Gasoline (87 Octane or higher)
Fuel Capacity 13 Gallons
Fuel Filter Replaceable Automotive Type
Cooling System Air-Cooled
Ignition Electronic
Starter 12 Volt
Charging System 20 Amp
DRIVE SYSTEM SPECIFICATIONS
 
Transmission Dual Hydrostatic
Pump Drive -
Wheel Drive 18 cu. In. High Torque Parker Motors®
Hydrostatic System Oil 20W50 Motor Oil
Hydraulic Filter 25 Micron, Replaceable Spin-On Type, 1 Per Pump
Pumps 16cc Hydro-Gear® Pumps
Hydraulic Coolers 6" 3,600RPM Cooling Fan; One Per Unit
MOWER DIMENSIONS
 
Weight 5400 - 1,410 lbs.; 6100 - 1,445 lbs.
Overall Height 53"
Overall Width
Chute Up/Chute Down
5400 - 56 1/2" / 68 1/2"; 6100 - 63 1/2" / 75 1/2"
Overall Length 92"
Tire to Tire Width 5400 - 59"; 6100 - 59"
Tires - Front 15 x 6.0 – 6 Smooth Tread
Tires - Rear 26 x 12 - 12 Reaper Tires
Steering Dual Lever Steering, Independent Control
Turning Radius Zero Turn - Zero Degrees, Turns Within Unit Length
Ground Speed (forward) Up To 13 mph
Parking Brake Internal Parking Brake