Bad Boy Mowers 993CC Vanguard®EFI 37HP

Double tap to zoom

 

Features

Strength

All New 1.5˝ x 3˝ Heavy-Gauge All-Steel Rail backbone.

All New Patented independent cast front iBeam suspension rails.

All New Larger Size, No-Flat Front Tires are standard.

Patented Dual Deck Support Isolators, paired with our new deck wear pad, minimizes damage from side impacts.

Comfort

All New 3-Link Rear Trailing Arm Suspension — the first and only of its kind in the industry. Matched with front suspension arms, to provide a smoother ride, more consistent tire contact and increased hillside stability.

All New Adjustable Footrest — the first and only of its kind. Can be moved forward or backward to accommodate riders of all sizes!

All New Suspension Seat is fully adjustable to operator weight and height with variable rate suspension, lumbar support and back adjustments from 5° to 15°.

Cut Quality

All New Sloped 1/4˝ Deck with 3/8˝ sides. The front deck chamber allows the grass to stand at a more natural, upright position before contact with the cutting blades.

All New Deck Idler Arm and Deck Spring with bearings for consistent belt tension and more consistent cutting speed.

PEER Spindles, made of ductile iron, are 60% stronger than aluminum housings. The optimized seal lip design allows for a maintenance-free spindle, providing longer life.

Power
Dual 16cc Hydro-Gear Pumps with 18ci Parker Wheel Motors,preferred by professionals.

Specifications

MOWER SPECIFICATIONS
Cutting Width 6100 - 61"; 7200 - 72"
Cutting Height 2" - 6" In 1/3" Increments
Blades 6100 - 1/4" x 2 1/2" x 21", High Lift, Heat Treated
7200 - 1/4" x 2 1/2" x 24", High Lift, Heat Treated
Lift and Height Adjustment Foot-Assist Manual lift with Dial-Style height adjustment. Optional electric lift
Blade Belt Single V-Belt Spring Tension
Anti-Scalp Rollers 6 Total (4 Double-Bracketed Front Wheels, 2 Rear Wheels)
Deck Flotation Floats on (4) 1/4" Deck Hangers
Deck Thickness 1/4" Thick Solid Steel With Additional 1/4" Steel Leading Edge And 3/8" Side Trim
ENGINE SPECIFICATIONS
Gross Horsepower/CC 993cc (37hp) Horizontal Shaft Vanguard® EFI
Cylinders 90 Degree V-Twin
Displacement 993 cc
Maximum Torque N/A (Vanguard does not release this information)
Fuel Requirement Unleaded Gasoline (87 Octane or higher)
Fuel Capacity 13 Gallons
Fuel Filter Replaceable Automotive Type
Cooling System Air-Cooled
Ignition Electronic
Starter 12 Volt
Charging System 20 Amp
DRIVE SYSTEM SPECIFICATIONS
Transmission Dual Hydrostatic
Pump Drive -
Wheel Drive 18 cu. in. High Torque Parker Motors
Hydrostatic System Oil 20W50 Motor Oil
Hydraulic Filter 25 Micron, Replaceable Spin-On Type, 1 Per Pump
Pumps 16cc Hydro-Gear® Pumps With Dual V-Belts From Engine Crankshaft
Hydraulic Coolers Finned Extruded Aluminum Heat Exchangers
MOWER DIMENSIONS
Weight 6100 - 1,535 lbs.; 7200 - 1,595 lbs.
Overall Height 51"
Overall Width
Chute Up/Chute Down
6100 - 62"/75 1/2"; 7200 - 74"/88"
Overall Length 91"
Tire to Tire Width 6100 - 59"; 7200 - 59"
Tires - Front 13 x 6.0 - 6 Smooth Tread
Tires - Rear 26 x 12 - 12 Reaper Tires
Steering Dual Lever Steering, Independent Control
Turning Radius Zero Turn - Zero Degrees, Turns Within Unit Length
Ground Speed (forward) Up To 13 mph
Parking Brake Internal Parking Brake