Choose an on-land or in-furrow hitch to meet your plowing preference. In-furrow plows with 4, 5 or 6 furrows; with factory or field-installed extensions can expand the 4-and 6-furrow respectively. Likewise, on-land plows are available in 5- (expandable to 6); 6- (expandable to 7) and 7-furrow models. Both on-land and in-furrow options are standard mechanical or optional hydraulic version available as upgrade. Hydraulic cylinders have NitroSteel rods for superior corrosion resistance.
Plow up to 14 in. deep with this popular two way. Leveling is simple with quick-set leveling pins. Plowing depth is controlled by the 3-pt. hitch and gauge wheel. Depending on the model, you can choose automatic hydraulic reset, spring-trip or rigid beams.
This extra heavy-duty two way is built for your high-horse power tractor. Top and bottom reinforcing plates, pivot cylinder anchor bars and the plow carrier frame all have special welding procedures – increasing the size of existing weld. The 166 has few adjustments, which makes it easy to prepare for the field and simple to operate. The plow levels easily with individual quick-set stops. A big rear landside (rear furrow wheel optional on 4 and 5 bottoms) adjusts to control side draft. A choice of rigid or spring beams allows you to configure the 166 to match your individual tillage needs.
Vertical clearance is 34 in. for no-plug plowing, reducing drag and optimizing speeds. Fore-and-aft clearance ranges from 32.6 to 36.8 in. depending on your cutting width.
All plows feature massive main-frames that use heat-treated steel forgings on the trip mounting pivots. These forgings overlay and project into the main-frame for added strength.
3-pt. cat ll and lll on 3-, 4- and 5-furrow 3-pt. cat III and IV on 6 furrow.
Size 4, 5 and 6 Bottoms
Bottoms HSCX Super Chief, HSCU deep tillage Super Chief
Depth of Cut 14 in. (356 mm)
Width of Cut 16 or 18 in. (406 or 457 mm), depending on model
Frame Size Heavy-duty rectangular steel box-type
Beams Removable heat-treated alloy steel rigid beams or heavy spring trip
Hitch 3-pt. Cat II and III on 4 & 5 furrow. Cat III & IV on 6 furrow (Should be equipped with front-end weights for stability)
Clearance Vertical-30 in. (762 mm) Fore and Aft-27 in. (686 mm) on 18in. (457 mm) plows, 24 in. (610 mm) on 16 in. (406 mm) plows
Coulters Available as attachment for rear bottom only.
Rippled blade 17 in.(432 mm) side arm: Rippled cushion 20 in.(508) mm) side arm
Leveling Individual quick-set stops
Rollover Hydraulic rollover mechanism with 3.5 x 12 in. (89 x 305 mm) double-acting cylinder with hoses
Gauge Wheel 14 in. (356 mm) automatic two-way automotive, with 9.6L-14 6PR tire
Rear Furrow wheel Optional, steel. Beam-stop attachment required for spring-trip plows when equipped with rear furrow wheel