Choose an on-land or in-furrow hitch to meet your plowing preference. In-furrow plows with 4, 5 or 6 furrows; with factory or field-installed extensions can expand the 4-and 6-furrow respectively. Likewise, on-land plows are available in 5- (expandable to 6); 6- (expandable to 7) and 7-furrow models. Both on-land and in-furrow options are standard mechanical or optional hydraulic version available as upgrade. Hydraulic cylinders have NitroSteel rods for superior corrosion resistance.
Plow up to 14 in. deep with this popular two way. Leveling is simple with quick-set leveling pins. Plowing depth is controlled by the 3-pt. hitch and gauge wheel. Depending on the model, you can choose automatic hydraulic reset, spring-trip or rigid beams.
This extra heavy-duty two way is built for your high-horse power tractor. Top and bottom reinforcing plates, pivot cylinder anchor bars and the plow carrier frame all have special welding procedures – increasing the size of existing weld. The 166 has few adjustments, which makes it easy to prepare for the field and simple to operate. The plow levels easily with individual quick-set stops. A big rear landside (rear furrow wheel optional on 4 and 5 bottoms) adjusts to control side draft. A choice of rigid or spring beams allows you to configure the 166 to match your individual tillage needs.
Vertical clearance is 34 in. for no-plug plowing, reducing drag and optimizing speeds. Fore-and-aft clearance ranges from 32.6 to 36.8 in. depending on your cutting width.
All plows feature massive main-frames that use heat-treated steel forgings on the trip mounting pivots. These forgings overlay and project into the main-frame for added strength.
3-pt. cat ll and lll on 3-, 4- and 5-furrow 3-pt. cat III and IV on 6 furrow.
Size 3, 4 and 5 Bottoms
Bottoms HSCX Super Chief, HSCU deep tillage Super Chief
Depth of Cut 14 in. (356 mm)
Width of Cut 16 or 18 in. (406 or 457 mm), depending on model
Frame Size Heavy-duty tubular steel
Beams Automatic hydraulic reset, rigid or spring trip
Hitch 3-pt. Cat III (Should be equipped with front-end weights for stability)
Clearance Vertical-32 in. (813 mm) with automatic beams, 30 in. (762 mm) with rigid and spring-trip beams)
Fore -and-aft–28 in. (711 mm) on 18 in. (457 mm) plows, 25 in. (635 mm) on 16 in. (406 mm) plows
Coulters Available as attachment for 3- and 4-furrow bottoms with spring-trip and rigid beams: rear bottom only on 5-furrow and hydraulic reset beam plows
Rippled blade 17 in.(432 mm) single-arm; Rippled cushion 20- or 22-in. (508, 559 mm) cast arm
Leveling Quick-set leveling pins
Rollover Hydraulic rollover mechanism with 3 x 8 in. (76 x 203 mm) double-acting cylinder with check valve and hoses
Gauge Wheel Automatic two-way automotive, with 7.50-14 4PR tire on 3- and 4-furrow rigid and spring-trip: 9.5L-14 6PR
on automatic plows and 5-furrow rigid plow